Installation manual

Parameters

TX Power

The TX Power parameter dialogue opens when you click the TX

Power

button in the Horizontal and Vertical menus.

This parameter dialogue is used to switch on the transmitter

output power. Note that this setting is common for all the menus.

Thus, if the power is switched on in one menu, it is automatically

also switched on in all other menus.

The following options are available in the

TX Power parameter

dialogue:

•

Off: Click to switch the transmission power off. The sonar

will operate in passive mode

•

On: Click to switch the transmission power on.

•

Close: C lick to close the parameter dialogue.

•

Help: Click to access the on-line help.