Installation manual

Simrad SH80

Target Track

The Target Track parameter dialogue opens when you click the

Target Track button in the GeoView menu. The GeoView menu

is in turn activated by pressing the

View button on the Operating

Panel (or the m

iddle mouse button) in any horizontal view, and

then selecting

View menu in the View pop-up menu.

Target track lines show the movement history of targets as a line

after the respective symbols. They are shown as straight line

segments drawn between each position ﬁx, with optional minute

markers to be added for each minute along the line. You can

switch the track line(s) o ff, or enable them for the priority target

only (P), or for all targets.

Options

None: Click to remove all target track lines.

[x] min.P: Click to enable a target track line on the priority target.

A minute marker is placed every [x] minutes.

[x] min.All: Click to enable a target track line on all targets.

Minute markers are placed every [x] minutes.

Close: Click to close the parameter dialogue.

Help: Click to access the on-line help.