Installation manual

Parameters
Store Mode
The Store Mode parameter dialogue opens when you click the
Store Mode buttonintheStore/Recall menu. The Store/Recall
menu is in turn opened by pressing the Store/Recall button on
the
Setup menu.
This parameter dialogue is used to select the storage function of
the
Record button on the Operating Panel and the Store button in
the
Store/Recall menu. The storage can be selected to contain
single shots, or different ping- or time sequences.
The following options are available in the
Store Mode parameter
dialogue:
•
Single shot: Click to record one single screen shot.
•
Each ping: Click to record the echoes from each ping in a
series of separate images.
•
Each 5th ping: Click to record the echoes from each fifth ping
in a series of separate images.
•
Each 10th ping: Clicktorecordtheechoesfromeachtenth
ping in a series of separate images.
•
Each 2 s: C lick to record the sonar echoes every two seconds
in a series of separate images.
•
Each 5th s: Click to record the sonar echoes once every fifth
second in a series of separate images.
•
Each 10th s: C lick to record the sonar echoes once every tenth
second in a series of separate images.
•
Each 30th s: Click to record the sonar echoes once every half
minute in a series of separate images.
•
Each 60th s: Click to record the sonar echoes once every
minute in a series of separate images.
•
Close: C lick to close the parameter dialogue.
•
Help: Click to access the on-line help.
To recall (playback) sonar images, click the
Recall button in t he
Store/Recall menu. To define the playback mode, click the Recall
Mode
button in the Store/Recall menu.
Related topics
Store/Recall menu on page 89
Setup menu on page 84
Store on page 156
Recall on page 144
Recall Mode on page 145
164385/E 157