Installation manual

Parameters

Range

The Range parameter dialogue opens when you click the Range

button in the Horizontal and Vertical menus.

Horizontal and vertical ranges are normally selected using the

buttons on the Operating Panel. You can also control these

settings directly using this parameter dialogue. The available

choices are listed in the dialogue. In addition to the read-out on

the menu, the current horizontal range is normally displayed over

the tilt indicator in the upper, left-hand corner of the display.

Available ranges are 50, 75, 100, 150, 200, 300, 400, 500, 600,

750, 1000, 1200, 1500 and 2000 meters.

Options

[Range]: Click to select manual r ange.

Manual: Click to enable manual range selection.

Auto: Click to enable automatic range selection during position-

and target tracking. This allows for optimal tracking.

Close: Click to close the parameter dialogue.

Help: Click to access the on-line help.

To maintain a steady display during seine setting, the lower

automatic range is set to 450 meters. C hanging the range or

pressing the

Manual button will stop the automatic ranging

function.

The sonar is designed to work with various horizontal range units

such as meter, nautical mile, US survey feet or yards. This choice

can be made by pressing the

Units button in the Display menu.