Installation manual

Parameters
Pulse Form
The Pulse Form parameter dialogue opens when you click the
Pulse Form button on the Horizontal and Vertical menus.
This parameter dialogue is used to select the shape of the
transmitter pulses. These can either be CW (Continuous Wave)
with different pulse lengths, FM (Frequency Modulation) with
different pulse lengths and number of frequencies, or PSK (Phase
Skift Keying) with constant pulse length.
Options
CW: Click to select CW Short, Normal or Long pulse length.
FM Auto: Click to select FM/CW and automatic selection of
transmission frequencies and pulse lengths depending on the
current range.
FMx: Click to select FM Short, FM Normal or, FM8 Long
transmission with different pulse lengths.
PSK1: Click to select phase shift keying transmission.
Close: Click to close the parameter dialogue.
Help: Click to access the on-line help.
Table 1 CW and FM pulse lengths and Auto mode for different ranges
Range
CW
Short
CW
Normal
CW
Long
Auto FM
Short
FM
Normal
FM
Long
PSK1
50 0,4 0,8 1,2
FM / 6,4
3,2 6,4 6,4 10.4
75
0,6 1,2 2,0
FM / 6,4
3,2 6,4 6,4 10.4
100 0,8 1 ,5 2,5
FM / 6,4
3,2 6,4 6,4 10.4
150 1,2 2 ,5 4,0
FM / 6,4
3,2 6,4 6,4 10.4
200 1,5 3 ,0 5,0
FM / 12,8
3,2 12,8 12,8 10.4
300 2,3 4 ,5 8,0
FM / 12,8
3,2 12,8 12,8 10.4
400 3,0 6,0 10
FM / 25,6
3,2 12,8 25,6 10.4
500 3,8
7,5
13
FM / 25,6
3,2 12,8 25,6 10.4
600 4,5 9,0 15
FM / 25,6
3,2 12,8 25,6 10.4
750 6,0 12,0 20
CW / 20
3,2 12,8 25,6 10.4
1000
7,5
15,0 30
CW / 30
3,2 12,8 25,6 10.4
1200 9,0 18,0 30
CW / 30
3,2 12,8 25,6 10.4
1500 11,3 22,5 30
CW / 30
3,2 12,8 25,6 10.4
2000 15,0 30,0 30
CW / 30
3,2 12,8 25,6 10.4
(Range in meters, pulse lengths in milliseconds)
164385/E 139