Installation manual

Simrad SH80

Inspect O bject

The Inspect Object parameter dialogue is either accessed when

you select a target marker in the

Objects menu, or when you

place the cursor on the marker and pushes the

Select button on

the Operating Panel.

This parameter dialogue displays the current parameters for the

chosen object. Note that every parameter may not be applicable

for all marker categories.

Options

Depth: This read-out shows the current depth of the chosen

object.

Distance: This read-out shows the current distance to the chosen

object.

Bearing (B): This read-out shows the current bearing to the

chosen object.

Speed (S): This read-out shows the current speed of the chosen

object.

Course (CO): This read-out shows the current course of the

chosen object.

Geographical Position: This read-out shows the current

geographical position of the chosen object.

Area (A): This read-out shows the estimated area of the chosen

object.

Volum e (V): This read-out shows the estimated volume of the

chosen object.

Delete: Click to delete the chosen object from the marker list.

Set Priority: Click to change the current marker to the “priority”

target. The marker is then identiﬁed with a “P”.

Close: Click to close the parameter dialogue.

Help: Click to access the on-line help.