Installation manual

Parameters

Heading

The Heading parameter dialogue opens when you click the Hdg

(Heading) button in the Status parameter dialogue at the bottom

of the menus.

The read-out of the current heading is a repetition of the

connected course gyro input. Manual heading input may be used

if signals from the external heading sensors are missing.

Note

This heading read-out must not be used for navigation.

The following options are available in the Heading parameter

dialogue:

• + (plus): Click to increase the manual heading with 1 degree.

• – (minus): Click to decrease the manual heading with 1

degree.

•

Manual: C lick to allow manual heading. Use this option only

if the ship’s heading sensor is unavailable.

•

Auto: Click to use automatic heading information from the

ship’s heading sensor.

•

Close: C lick to close the parameter dialogue.

•

Help: Click to access the on-line help.