Installation manual

Simrad SH80
Edit Gear (Trawl)
The Gear parameter dialogue opens when you click the Gear
button on the Setup menu. Each of the available options in the
Gear dialogue can be edited using the Edit button. When a trawl
has been selected, this
Edit Gear parameter dialogue is provided.
These parameters allows you to monitor or define the distance
and depth of your trawl, as well as the height and width of
your trawl opening. If you use the Simrad ITI system, these
parameters will be provided automatically.
Options
Distance:Clicktodefine the distance to the trawl. The setting is
automatically if you click the
Auto button, provided that a Simrad
trawl system is connected to the sonar. If you click
Manual, you
can define the distance in s teps of 10 meters.
Depth:Clicktodefine the depth of the trawl. The setting is made
automatically if you click the
Auto button, provided that a Simrad
trawl system is connected to the sonar. If you click
Manual, you
can define the depth in steps of 10 meters.
Height: Clicktodefine the height of the trawl opening. The
setting is made automatically if you click the
Auto button,
provided that a Simrad trawl system is connected to the sonar. If
you click
Manual, you can define the height in steps of 1 meter.
Width:Clicktodefine the width of the trawl opening. The setting
is made automatically if you click the
Auto button, provided that
a Simrad trawl system is connected to the sonar. If you click
Manual, you can define the width in steps of 10 meters.
Length:Clicktodefine the length of the trawl symbol on the
sonar display.
Close: Click to close the parameter dialogue.
Help: Click to access the on-line help.
Related topics
Setup menu on page 84
Gear on page 124
118
164385/E