Installation manual

Simrad SH80
About the parameter dialogues
When a parameter is selected, the available choices are shown in
the dialogue below the menu. The setting is then made using the
available buttons or lists. Several levels are frequently used to
select the parameters. Note that:
1 In many cases you will not need to open the parameter
dialogue, as you can control the settings directly on the
menu button.
2 The parameter is selected and activated by the sonar once
it is highlighted in the dialogue. The operational changes
can thus be investigated from within the dialogue without
closing it.
3 The
Close button will always c lose the dialogue.
4 The
Help button will always provide short-form context
sensitive help. This help text will appear on top of the
parameter dialogue, and you need to click
Close to return.
In the help window you can also click
Free to access to full
interactive manual. This may not be available in all modes,
as it will block the view of the sonar echoes. Once the
interactive manual has been accessed, you need to click
Free
one more time to reduce the large help window back to the
short-form presentation. If you click
Close in the large help
window, the same large window will automatically appear
next time you click
Help in a parameter dialogue.
The menu settings marked with an asterisk, indicate the normal
setting which perform well under normal conditions. If one got
lost in the menu settings, a Default Settings function will bring
up these normal settings. After experience, when the contents of
the menus are better known, the increase/decrease function on
the actual menu button can be used directly without opening the
parameter dialogue.
102
164385/E