Installation manual

Connecting peripheral equipment
73
851--164300 / C
8 PERIPHERAL EQUIPMENT
8.1 General
Introduction
It is not necessary to make the connection of the peripheral
equipment before the start-up procedure is finished, and this
equipment may therefore be connected later.
However, do not connect the termination plugs for the auxiliary
equipment to the Sonar Interface Unit before mentioned in a later
chapter.
Required inputs
The SH80 sonar system requires input from both a speed log and
a course gyro. Inaccurate data from either of these instruments
will result in an incorrect indication of vessel and target
movements.
→ Speed log, page 75.
→ Course gyro, page 77.
Additional inputs
The following peripheral sensors may be connected to the SH80
sonar:
→ (D)GPS, page 78.
→ Echo sounder, page 79.
→ Trawl System, page 80.
→ Purse seine system, page 81.
→ Current meter system, page 82.
→ Radio buoy system, page 83.
→ Trackball and mouse, page 84.