Installation manual

Cable layout and connections
57
851--164300 / C
C11-C14 / C20-C25 Peripheral equipment
These are cables used to interface peripheral equipment. They are
described in detail in chapter Peripheral equipment.
→ See page 73.
C15 - Transceiver Unit
This is a data cable from the Processor Unit in the wheelhouse to
the Transceiver Unit in the sonar room.
→ Cable details on page 161
100 meters of cable is included with the delivery from Simrad.
C16 - Transducer cable
The transducer cables are provided by the manufacturer. They are
physically connected to the top of the transducer shaft. All
transducer cables are provided by Simrad.
C17 - Motor control
This cable is connected between the Transceiver Unit and the
Motor Control Unit mounted on the Hull Unit.
→ Cable details on page 163.
10 meters of cable is included with the delivery from Simrad.
C19 - Motor control mains
This cable provides AC mains to the Motor Control Unit. The cable
must be pr ovided by t he installation shipyard.
→ Cable details on page 165.