Installation manual

Simrad SH80
54
851--164300 / C
7.2 System cabling
Cable layout
Cables are identified according to individual cable numbers and
drawing numbers listed on the cable plan and in the cable overview
table.
The cable plan is shown on page 55.
The cable specifications are provided on page 56.
Cable information includes:
Required specifications
Equipment they are connected to
Corresponding terminations
System and shipyard cables
Cables fall into two categories:
Cables supplied by Simrad with the standard SH80 system
delivery. These cables are marked on the cable plan with an
asterisk (*).
Cables provided by t he shipyard performing the installation or
the shipowner.
System cables
Most system cables in the standard delivery are supplied by
Simrad. Cables to be provided by the installation shipyard are
specified in the cable specifications.
Shipyard cables
The cable specifications provided are the minimum acceptable.
Detailed cable information is provided for the:
Connections at each end (including reference to the
corresponding: system unit, terminal board identification and
plug/socket to be used).
Number of cores
Recommended type
Minimum specifications
Simrad accepts no responsibility for damage to the system or
reduced operational performance caused by improper wiring.