Installation manual

Simrad SH80

851--164300 / C

6.6 Sonar Interface Unit

The Sonar Interface Unit should be mounted vertically with the

cable inlet downwords on a side wall inside a console, cabinet or

desk. It must be mounted close to the Sonar Processor Unit,

Operating Panel and display unit.

Provide enough space for easy access to the cabling.

149 mm

Ø7 mm

253 mm

(CD7026)

Figure 17

Mounting the

Sonar Interface

Unit.

Observe the following procedure. To ensure correct operation, tick

off every item when the action has been carried out.

1 Prepare the mounting location.

2 Attach the Sonar Interface Unit vertically with four

fastening screws on the attachment lugs. The diameter of the

four fastening holes are 7 mm.