Installation manual

Installation trunk
31
851--164300 / C
3.2 Protection
Protecting blister
A steel blister must be fitted for protection. The blister shown is
welded to the shell plating and then filled with oil to prevent
corrosion. This method provides excellent protection and
simplifies maintenance.
→ Refer to figure 6 on page 33.
Open blister types are designed to be welded t o the shell plating.
→ Refer to figure 7 on page 34.
Corrosion protection
As soon as all installation, welding and grinding has been
performed, the trunk and the surrounding area should be primed
and painted using a quality protective coating.
3.3 Trunk installation measurements
For future reference, measurements A, B, C and D from the
drawings must be made and noted in the Trunk installation
measurements table provided.
Millimetres Inches
Distance A
Height B
Height C
Height D
Table 1 Trunk installation measurements
If an other type of installation is chosen, make a sketch including
all relevant dimensions.