Installation manual

Introduction
5
851--164300 / C
Installation trunk
The installation trunk may be fabricated by the shipyard or
supplied by Simrad:
Unit Order number
SH80 Installation trunk SD5--112632
Adapter flanges
The f ollowing adapter flanges with blind cover are available for
mounting the SH80 Hull Unit in existing, earlier model installation
trunks:
Unit Order number
SQ4 Adapter flange SD5--112641
SQ & SB2 Adapter flange SD5--112642
SK3 Adapter flange SD5--112643
Display unit
The SH80 sonar requires a VGA or DVI colour display with a
resolution of at least 1280 x 1024 pixels. A 19-inch LCD may be
ordered from S imrad. An optional mounting kit must be ordered
for desktop installations.
Unit Order number
19--inch LCD monitor , AC version 298--078946
Desktop mounting kit 598--078951
Gyro interface
If the course gyro data i s not available on a standard NMEA 0183
serial line, a gyro interface box is required.
Unit Order number
LR40 Gyro interface unit 298--078535
Frequency
The S H80 can be configured to operate on multiple frequencies.
This feature is especially helpful in suppressing interference from
other sonars.
Unit Order number
Multiple frequencies KIT--204072