Installation manual

Simrad SH80
4
851--164300 / C
1.3 Scope of supply
Main units
The standard Simrad SH80 sonar system is comprised of the
following main units:
Unit Order number
Operating Panel SH8--203593
Sonar Processor Unit SH8--207896
Sonar Interface Unit SP7--207891
T ransceiver Unit, 230 Vac SH8--203591
SH80 Hull Unit SH8--203590
Note The standard SH80 Transceiver Unit will only operate on 230 Vac.
A 115 Vac version is available, refer to Options below.
Note The display unit is not included in the standard delivery, but may
be ordered as an option. Refer to Display Unit below for more
information.
→ Refer to page 134 for more information concerning weights and
dimensions of the various units.
General
The Simrad SH80’s Hull Unit employees an installation trunk
which is compatible with earlier model Simrad SL, S X and SD570
installation trunks and may be easily mounted in either. As an
option, an adapter flange is available for mounting the SH80 Hull
Unit in earlier model S K, SB or SQ installation trunks.
Note The Simrad SH80 installation trunk is not included in the standard
delivery, but may be ordered as an option (see below).
Options
The following options may be ordered at an additional charge to
augment the standard Simrad SH80 sonar system delivery.
Transceiver Unit, 115 Vac version
If the AC mains on the vessel is 115 Vac, this Transceiver Unit must
be used.
Unit Order number
SH80 Transceiver Unit, 115 Vac SH8--205064
As this unit is used instead of the 230 Vac standard Transceiver
Unit, no additional charge is required.