Installation manual

Simrad SH80
164
851--164300 / C
Standard AC power cable
This cable is a standard three-wire power cable. It is commercially
available in standard lengths, or may be produced locally to suit the
specific i nstallation needs. The instrument end is terminated in a
standard IEC female socket, while the other end is terminated in
a plug suitable for the local standard.
W301 / Rev B
Standard power cable for 115/230 Vac 2-phase
Live (normally Blue)
Neutral (normally Brown)
Use the applicable plug to suit
local standard. British standard
plug used as example only.
Ground (always Yellow or Yellow/Green)
IEC plug
Note Different cable colours may be used for the “live” and “neutral”
wires. Ground is however always on green/yellow.
Conductors 2x1.5mm
2
+GND
Screen None
Voltage 750 V
Max. diameter Set by the plugs