Installation manual

Drawing file
157
851--164300 / C
Internal control and communication
cables
These drawings detail the three cables used between the SH80
Sonar Processor Unit and the Sonar Interface Unit.
C4 - Control / C5 - Serial
W206A / Rev.A
Control and Serial cables
Cable C4
Connects to the far right hand
connector on the rear side
of the Sonar Processor Unit
Cable C5
Connects to circuit board J5
on the rear side of the Sonar
Processor Unit
The C4 and C5 cables are provided by the manufacturer. Note that
the length of these cables are limited to 1.2 meters.