Installation manual

Simrad SH80
100
851-164300 / C
Object menu
13 Check the Object menu.
a Move the cursor to a new position inside t he echo area.
b Press the Object button (field 6).
c Check that an Object menu appears. (Note thas this menu
appears next to the cursor in the echo field.)
d Press the Select button again to remove the menu.
Manual and automatic tilt
14 Check the Tilt readout.
a Select the Horizontal menu.
b Press the Tilt Up/Down buttons (field 7) repeatedly.
c Check that the tilt readout in the menu cor responds with
the Tilt indicator shown in the top left corner of the
display.
d Press the Auto button.
e Check that the tilt limits appear on the Tilt indicator.
f Press Manual to stop the automatic tilt program.
Zoom view
15 Check the Zoom function.
a Select Mode 1 (Bow Up).
b Move the cursor to an echo, and press the Zoom button
(field 8).
c Check that the echo is zoomed up.
d Press the Zoom button again.
e Check that the echo is brought back to its normal size.
Off centre
16 Check the Off centre function.
a Move the cursor to any position inside the echo area.
b Press the Off Centre button (field 8).
c Check that the ship’s symbol changes its position to
where the cursor is.
d Select Mode 2 and then Mode 1 to move the ship symbol
back to the screen centre.
Training
17 Check the Training function.
a Pr ess the left and right Manual train buttons repeatedly
(field 9, right two buttons).