Installation manual
Simrad SH80
98
851-164300 / C
SYMBOL
(CD5347)
Target marker
Own ship marker
Circle marker
Gear symbol
Figure 36 The Symbol
field with the three
markers and the Gear
symbol
3 Remove Target Marker and Ship Marker.
a Use the trackball to move the cursor to the Objects tab on
the right-hand side of the menu.
b Press the Select button.
c Press the Delete All button.
d Check that both the Target Marker and the Ship Marker
disappear.
4 Check the Circle Marker.
a Press the Circle Marker button (field 2, third button).
b Check if a circle appears centred around the cursor.
c Press the button once more, and check that the circle
marker disappears.
5 Check the Seine circle.
a Press the Gear button (field 2, bottom button).
b Check that a Seine circle appears next to the ship symbol.
c Press again to bring up the Ship Marker at the ship
symbol.
d Press a third time to remove the Seine circle.
Modes
6 Press the four Mode buttons (field 3) and check that different
display modes are selected.
Horizontal gain and range
7 Check the Horizontal gain readouts.
a Select Mode 2 (270/Vertical).