Installation manual

Simrad SH80
94
851--164300 / C
11 Set the hoisting/lowering switch to the Hoist position t o
completely hoist the transducer.
- Hoisting will be stopped automatically when the top of
the transducer makes contact with the upper limit switch
S304.
12 Repeat the hoisting/lowering operation to find the best
position f or a permanent fastening of t he flexible transducer
cable.
13 Set the hoisting/lowering switch to Stop.
14 Release the motor overload switch S301 by pressing the red
button marked 0. This will prevent unwanted lowering o f the
transducer.