Installation manual

Simrad SD570

850--160139 / A

5.9 Markers

This menu shows position data (distance, bearing and depth) for

the markers in the sonar picture. Positioning of markers is

described in chapter 1.2.(3) “Display oriented push buttons”.

MARKERS

M DIST. BEAR DEPT

1 12345 -134 1234

2 564 89 120

3 1567 121 675

4 1234 143 566

5 876 113 98

6 832 -78 176

7 854 9 123

8 88 -173 46

C 455 131 76

Amaximum ofeightmarkers can be positionedat onetime. Ifthis

number is exceeded, the marker first selected will be replaced by

the one last selected. ”C” on the bottom line shows the position

data of the moveable marker cross. If automatic tracking is used,

a ”T” will show the position data for the tracking circle.

As the numbered markers are locked geographically they may

move outside the screen. The computer keeps track of allmarkers

inside a radius of 60 kilometers. Outside this radius the position

data will be replaced by a row of x’es.

To present the bearing line to a selected marker, move the menu

cursor to the relevant marker. To erase a marker, move the menu

cursor to the relevant marker. Press ENTER and this submenu

will appear:

MARKER NO: 5

ERASE MARKER

YES

This is also intended as a ”regret function” if one by mistake has

pressed ENTER after selecting a bearing line.