Installation manual

Simrad SD570

850--160140 / A

2 SONAR CONTROL UNIT

2.1 Cleaning

The cabinet should be kept clean and dry. Remove salt water

residue with a soft cloth which has been moistened in fresh

water. Do not use strong solvents.

Note ! The display screen should be handled with care to avoid

damaging the anti-glare filter coating. Use a soft cloth without

any strong solvents when cleaning it.

2.2 Dust filter

ThereisadustfilterontheairinletattherearwalloftheSonar

Control Unit (refer to figure 1). To avoid overheating, this

shouldbe inspected, and if necessary, cleaned once every third

month.

The filter is accessible by snapping off the plastic cover. The

filter should be vacuum cleaned, or washed in soap and water.

If washed, the filter must be dried thoroughly before being

reinstalled.