Installation manual

Operation
55
850--160139 / A
5.21 Course
If a gyro with a stepper or synchro output is connected to the
sonar, the text ADJUST COURSE will be shown every time the
sonar system is switched ON. This is a reminder that the course
shownon the screen must be adjusted in accordancewiththe gyro
course.
COURSE: 123°
ADJUST COURSE
? 360°
? 0°
To increase the course value, press the joystick upwards, and to
decrease the value, press the joystick downwards.
When the course on the screen corresponds to the gyro course,
press ENTER and check that the course is correct.
Note ! The course on the screen must not be used for navigation.