Installation manual

Simrad SD570 / Base version
16
851--160117 / B
j Use the SEARCH SECTOR +/-- buttons (9 left) to check
that the sector limits can be adjusted from 22° to 360°.
j Press the POSITION TRACK button (9) and check that
a circle appears at the yellow cross position.
j Press the TARGET TRACK button (9) and check that a
circle appears at the yellow cross position.
j Press the MAN (manual training) button (9) and check
that it lights up.
j Select STANDARD in the menu in order to put all the
menu settings back to normal.
j Set TX POWER (transmission power) in the menu to
OFF.