Installation manual

Introduction
13
851--160117 / B
Figure 6 - Connections to the rear of the Sonar Control Unit
j Use the menu joystick in the following way to get a
simulated echo on the screen:
- Move the menu cursor below the PP FILTER to the
CONSTANTS in the extra menu, and push enter (right).
- Move the cursor to SIMRAD TEST and push enter.
- Move the cursor to TEST2 and push enter.
- Move the cursor to SYNT. SHOAL and push enter.
j Check that after a few seconds a simulated echo will be
displayed on the screen.
j Check if the picture size and position on the display are
correct. If not, adjust the picture with the display
adjustments (see figure 7).