Installation manual

Simrad SD570 / Base version
20
851--160116 / B
6 CABLING
6.1 Cable plan
Figure 12 shows the cable plan for the SD 570 and SE 570 sonars.
The cable numbers also refer to the interconnection diagram,
drawing no. 824-112979. This drawing is located in section
Drawings in thismanual. Thecable specificationsarelisted inthe
table below.
Note that cable no. 4 is delivered with a standard length of 50
meters, and has a preconnected plug in the Sonar Control Unit
(wheelhouse) end.This cableis included inthe Sonar Control Unit
package. As an option, cable no. 4 can be delivered in lengths of
75 or 100 meters.
Note that the length of the flexible transducer cables 7 and 8 is
fixed to approximately 3.5 meters.
Cable no. Cable type Cable dia (mm)
1 Screened cable, 2x0.5 mm
2
6
2 RCOP 5x1 mm
2
12
3,5 Mains cable, length 2 m 7
4,6 Data cable 8x(2+1)x0.5 mm
2
14
7,8 Flexi--cable, 3.5 m fixed length. Mounted
to Hull Unit
62
9
RCCP/750V 4x2.5 mm@
17