Installation manual

Simrad SD570 / Base version
2
851--160115 / B
2 SUPPLY CONDITIONS
2.1 General
This manual describes the installation for both the SD 570 and the
SE 570 sonars. The only difference between these sonars is the
angle to which the transducer can be tilted. The SD 570
transducer can be tilted to - 90_, while the SE 570 transducer is
limited to -45_. Allunits for the SD 570 and SE 570 have the same
physical size.
The Hull Unit uses an installation trunk which is equal to t he old
Simrad SL and SX installation trunks. The Hull Unit can therefore
easily be mounted in an old SL or SX trunk. As an option, a n
adapter flange can be delivered for mounting the Hull Unit in an
old SK, SB or SQ trunk. Note that the trunk is not included in the
standard delivery, but can be ordered as an option (see chapter 2.3
Options ).
2.2 Main units
The standard SD 570 Sonar system comprises the following main
units:
Simrad SD 570 Sonar Control Unit SD5-112629..............
Simrad SD 570 Transceiver Unit SD5-112630................
Simrad SD 570 Hull Unit SD5-112631.......................
The standard SE 570 Sonar system comprises the following main
units:
Simrad SE 570 Sonar Control Unit SE5-112898...............
Simrad SE 570 Transceiver Unit SE5-112899.................
Simrad SE 570 Hull Unit SE5-112900.......................
A diagram of the standard sonar system is shown in figure 1.
2.3 Options
The installation trunk can be made by the shipyard (refer to
drawing in section “Trunk systems” ) or be ordered as an optional
delivery:
Installation trunk with blind cover SD5-112632..............
For installations in an existing SK, SB or SQ trunk, refer to the
drawings in the section Trunk systems in this manual. The
following adapters with blind covers can be ordered as options:
SQ4 Adapter flange SD5-112641...........................