Installation manual

Introduction
25
851--160117 / B
j Continue to connect the lower connector row with
numbers referred to figure 11. Remember to fasten the
cables to the strapping bar.
Figure 11 - Connecting the transducer cable
j Remount the outer strapping bar and fasten the
connectors to the upper front connectors on the TRBs as
shownonfigure 11. Remembertofasten thecables tothe
strapping bar.
j Remountthecover(pos.1onfigure9)carefully,andmake
sure that each of the lower connectors are safetly kept in
correct position, and that no cables are squeezed.