Installation manual

Simrad SD570 / Base version
20
851--160117 / B
* PresstheHOISTbuttonforapproximately2seconds,and
check if the text HOISTING: UPPER is shown in the
menu. Also check that both buttons light during the
hoisting,andthatonlytheHOISTbuttonlightswhenthe
transducer stops in the fully hoisted position. The menu
should now show the text TRANSD. POS: UPPER.
j SettheswitchinthemotorcontrolunittoSTOPposition.
* Switch OFF the Sonar Control Unit by pressing the
ON/OFF--HOIST button for approximately 2 seconds.