User's Manual Part 2

Instruction manual
89
E04572
Press the V
OL
▲ and V
OL
▼ keys to scroll through the available
station/intercom that can be called from the station:
“Stn 1–Stn 2” Intercom call to Station 2
“Int Spkr 1” Intercom call to Intercom speaker 1
Press the PTT key or O
K to activate the intercom, or press ON/C
to cancel. Once the call has been initiated, further presses of the
O
N/C key will re-sound the call alarm. Pressing the PTT key
will open the audio path to the called station.
11.6 Toggling between Lat/Long and UTC views
If the Position View option (see section 8.3.2) is turned on, the
current position will be displayed on the bottom two lines of
the display.
The UTC time can be displayed instead by pressing S
HIFT then
8 (L
AT/LON) key for 2 seconds (Fig 11.6).
Repeat the above key sequence to toggle between the position
and time displays.
UTC 19B26-
Fig 11.6 - Displaying UTC time
12
I N T ERCOMAA
STN 1 -STN2 B
INT
Fig 11.7 - Making an intercom call to Station 2 from Station 1
11.7 Intercom
If the system comprises more than one station, or includes
intercom speakers, it is possible to make an intercom call to a
selected position from a handset.
11.7.1 Making an intercom call
Press SHIFT then 6 (INTERCOM) to enter intercom mode. The
display will show “INTERCOM STN X – STN Y”, where “X” is
the ID of the current station being used and “Y” is the first of
the other stations in the system (Fig 11.7).