User's Manual Part 2

RS81/RS82 VHF
54
E04572
Press the VOL ▲ and VOL ▼ keys to select another Scanning
menu option, or press O
N/C to return to the main menu.
From the Scanning menu choose “MEM SCAN SELECT” and
press O
K. Enter the relevant channel number using the numeric
keypad. The display will show the channel number and its
memory status – “MEM SCAN” if it is not currently selected
for memory scan, or “MEM SCAN ENABLED” if it is already
selected (Fig 8.3).
Use the O
K key, to change the channel’s status – i.e. if it is not
selected, pressing O
K will add it to the Memory scan cycle and
vice versa.
Repeat the above procedure to select or deselect further chan-
nels. When finished, press O
N/C to return to the main menu, or
use the V
OL ▲ and VOL ▼ keys to select another menu option.
NOTE North American users – Only one Weather channel can be
stored in the memory scan; if another one is selected, it will
override the existing channel. The Weather channel is not
scanned as part of the memory scan sequence, it is in fact used
by the Weather Watch function (see section 11.1).
8.1.5 Memory scan clear
Memory scan clear will remove all previously selected chan-
nels. To clear all channels select “MEM SCAN CLEAR” from
the Scanning menu, then press O
K – the display will change to
show “CHANNELS CLEARED” (Fig 8.4).
65
MEM SCANAA
ENABLEDBB
INT
65
MEM SCANAA
INT
Fig 8.3 - Selecting channel for Memory scan
CHANNEL CURRENTLY NOT SELECTED CHANNEL ALREADY SELECTED
CHANNELSSS
CLEAREDBBB
Fig 8.4 - Clearing all previously selected channels