User's Manual Part 2

RS81/RS82 VHF
76
E04572
If the caller’s MMSI number is stored in the MMSI directory
(see section 10.2), the display will show the name stored
instead. Press O
K to accept the call – the display will change to
“REPLY ON CH X” (Fig 9.15), where “X” is the specified work-
ing channel – or O
N/C to reject the call.
9.3.5 Group call
If the radio has a Group ID MMSI number (cf. section 8.2.2)
and a group call is received, the radio will sound an incoming
call alarm. The display will flash between displaying “ROU-
TINE GROUP CALL”, the caller’s MMSI number and the spec-
ified working channel (Fig 9.14).
Press OK again to switch back to the working channel.
06
ROUT I NESS
GROUP CALL
INT
FROMPRAY 0
3895623970
Fig 9.14 - Incoming group call
Fig 9.15 - Working channel specified by incoming group call
06
REPLY ONAA
CH 1 0BBBBB
INT