User's Manual Part 2

Instruction manual
75
E04572
9.3.3 All Ships Safety call
If an All Ships Safety call is received, the radio will sound an
incoming call alarm. The display will flash between “ALL
SHIPS SAFETY” and the caller’s MMSI number. If the caller’s
MMSI is stored in the MMSI directory (see section 10.2), the
display will show the stored name instead.
Press O
K to accept the call – the display will change to “REPLY
ON CH X” (where “X” is the specified working channel), or
press O
N/C to reject the call. Press OK again to switch back to
the working channel.
9.3.4 All Ships Urgency call
If an All Ships Urgency call is received, the radio will sound an
incoming call alarm. The display will flash between displaying
“ALL SHIPS URGENCY” and the caller’s MMSI number. If the
caller’s MMSI is stored in the MMSI directory, the display will
show the name stored instead (Fig 9.13).
Press OK to accept the call and automatically switch to channel
16, or O
N/C to reject it.
NOTE All Ships Urgency calls always use channel 16 as the working
channel.
10
ALL SHIPSSS
URGENCY9 9
INT
FROMPRAY 0
SEASPRAY 0
Fig 9.13 - Incoming All Ships Urgency call