User's Manual Part 2

Instruction manual
53
E04572
Use the VOL ▲ and VOL ▼ keys to select another option, or
O
N/C to return to the upper menu level.
8.1.3 All scan show
This function will display all inhibited channels. From the
Scanning menu select “ALL SCAN SHOW” and press O
K. The
display will change to “SHOWING CHANNELS” and display
all inhibited channels in sequence.
Press the V
OL ▲ and VOL ▼ keys to select a further option, or
O
N/C to return to the main menu.
8.1.4 Memory scan select
This function selects the channels to be used in the Memory
scan cycle (see section 7.9).
Repeat the above procedure to enable or inhibit further chan-
nels, or use the V
OL ▲ and VOL ▼ keys to select another menu
option. To exit this menu level, press O
N/C.
8.1.2 All scan reset
To reset all inhibited channels select “ALL SCAN RESET” from
the Scanning menu and press O
K. The display will show
“CHANNELS RESET” (Fig 8.2).
From the Scanning menu select “ALL SCAN INHIBIT” and
press O
K. Enter the relevant channel number using the numeric
keypad. The display will show the channel number and its cur-
rent status – “ALL SCAN” for enabled, or “ALL SCAN INHIB-
ITED” for excluded channels (Fig 8.1). Use the O
K key to
change the channel’s status.
65
ALL SCANAA
INH IB ITEDB
INT
Fig 8.1 - Selected channel inhibited from scan
CHANNELSSS
RESETEDBBB
Fig 8.2 - All inhibited channels reset