User's Manual Part 2

Instruction manual
69
E04572
NOTE The channel number displayed during the call is determined
by the coast station.
Press O
N/C to end the call, or wait for the other participant to
replace the receiver.
The next stage is to specify the coast station the call is to be
routed through. Either manually enter the MMSI number of the
coast station using the numeric keypad, or use the V
OL ▲ and
V
OL ▼ keys to scroll through the Coast Station MMSI directory
(Fig 9.4). Press O
K to confirm the selected entry.
NOTE The MMSI number entered must have a “00”-prefix (which
indicates a coast station), or it will not be accepted.
The display will show “PRESS OK TO SEND” – press O
K to
initiate the call, or O
N/C to abort. On initiation of the call, the
display will show “ATTEMPTING TO CONNECT”. If the call
cannot be connected for any reason, the display will show
“CANNOT CONNECT”, then “PLS WAIT 15 MINUTES”
before returning to the default display.
If the call is connected, the display will show “CALL IN
PROGRESS” (Fig 9.5) – press the PTT key to talk and release to
listen.
06
COAST 1 AAA
INT
Fig 9.4 - Selecting a coast station from the Coast Station directory
07
CALL I N AAA
PROGRESSBB
INT
Fig 9.5 - Call has been connected