Operation Manual
6 RS25 Operation and Installation Manual
1-2 Customize your Simrad VHF Radio
You can customize the radio to suit your individual preferences. Some preferences can be set directly
through the keys as explained in this Section.
Other preferences are set up through the built-in menus and these are explained in the other Sections.
1-3 How to Display and Navigate Menus
Hold down1. CALL/MENU to show the RADIO menu
or
Press2. CALL/MENU to show the DSC CALL menu.
Only four menu items can be displayed at any one time on the LCD. Rotate the rotary knob to 3.
scroll up and down the menu until the cursor is positioned at the desired option. Press ENT
(push the rotary knob in) to display that option.
Make any entries or changes as explained in the following section.3.4.
Press ENT to confirm changes. Otherwise, press EXIT to keep the original entry.4.5.
Press EXIT to backup one screen (this key is equivalent to an ESC function on a PC)5.6.
1-4 How to Enter or Change Alphanumeric Data
If your radio doesn’t have an optional alphanumeric microphone, use the + CH - key on the
microphone to enter alphanumeric data as follows:
• PressCH-tocountthroughnumbers,orholddowntoscrollrapidlytothedesirednumber.
• PressCH+tostepthroughthealphabet,orholddowntoscrollrapidlytothedesired
character.
• Ifyoumakeanerror,pressCH-until<isdisplayed,thenpressENTorpushtherotaryknobto
backup and correct the entry.
If your radio has an alphanumeric microphone, use the keypad to enter the channel numbers and
names. Each key has the functionality shown below.
• UseCLRtobackupandENTtoconfirm,orjustwaitforthecursortoadvanceautomaticallyto
the next position when entering data (similar to mobile phone operation),
On the base station, use the rotary knob to enter alphanumeric data and push to ENTER the data.
KEY 0 1 2 3 4 5 6 7 8 9
Normal and
Menu Mode
0 1 2 3 4 5 6 7 8 9
Edit Mode
Press 1
0 1 2 3 4 5 6 7 8 9
Press 2 Space - A D G J M P T W
Press 3 ( . B E H K N Q U X
Press 4 ) “ C F I L O R V Y
Press 5 % / ? ! : # “ S & Z