Operation Manual

RS25 Operation and Installation Manual 61RS25 Operation and Installation Manual
IMPORTANT: You can’t make any DSC transmissions until you’ve obtained a user MMSI and entered it
into your RS25 .
See Appendix E for Obtaining and Entering MMSI information.
Black
Power/data cable
Orange Blue
Blue Grey
Pin Wire Function Notes
1 Red No connection (Not used)
2 Orange NMEA OUT (+) (To GPS)
3 White Program/clone (Not used)
4 Green NMEA IN (-) (From GPS)
Pin Wire Function Notes
5 Yellow NMEA IN (+) (From GPS)
6 Black NMEA OUT (-) (Ground)
7 Blue NAVBUS (+)
8 Grey NAVBUS (-)
Connecting to a Simrad display using NavBus:
GPS and COM connector
RS25 Base
unit
Simrad GPS product
Wiring for GPS and COM connector (See 7-8, 1. GPS and COM connector)