Operation Manual

RS25 Operation and Installation Manual 57RS25 Operation and Installation Manual
7-3 Checklist
The following items should be supplied in the box. Check before starting the installation and contact
your dealer if an item is missing.
1
3
4
2
6
5
7
8
9
10
11
12
13
14
15
16
17
18 & 19
NOTE: An antenna is NOT provided. Consult your
Simrad dealer for advice if necessary.
1. Mounting gimbal for the VHF radio
2. Power supply cable with in built 7 Amp fuse
3. External speaker connection cable with white
(+) wire and black (-) wire
4. GPS connection cable
5. Two mounting knobs
6. Microphone bulkhead mount
7. Four self-tapping screws for the mounting
gimbal
8. Four at screws for the mounting gimbal
9. Four spring washers for the mounting gim-
bal
10. Four plain washers for the mounting gimbal
11. Four nuts for the mounting gimbal
12. Two self-tapping screws for the microphone
bulkhead mount
13. Two at screws for the microphone bulkhead
mount
14. Two spring washers for the microphone
bulkhead mount
15. Two plain washers for the microphone bulk-
head mount
16. Two nuts for the microphone bulkhead
mount
17. Two ush-mount brackets for recessed instal-
lation
18. Two M5x32 screws for recessed installation
19. Two M5x10 screws for recessed installation
20. Two plastic stoppers for the recessed installa-
tion (not pictured)
21. Installation template (not pictured)
22. One 7 Amp spare fuse (not pictured) in case
of accidental reverse of battery polarity
23. RS25 base unit and microphone (not pic-
tured)
24. RS25 protective cover (not pictured)