Installation manual

Introduction
3
851-165187 / Rev.A
Scope of supply
Main units
The standard Simrad PI54 catch monitoring system is comprised
of the following main units. All must be ordered separately.
Unit Order number
PI54 Operator Unit PI3--280025
Hydrophone, purse seine HYD--202711
Hydrophone, trawl HYD--205254
Hydrophone, portable HYD--202713
Paravane kit for portable hydrophone KIT--207284
+24 Vdc 5 A Power supply (230 vac) 290--076359
+13,2 Vdc 10 A Power supply (230 vac) 290--087521
Echo sounder transducers
The echo sounder transducers are optional. Note that only one
of the echo sounder transducers is required. Only the
transducers r ecommended by Simrad for use with the PI54
system are listed.
T ransducer Order number
38/200 Combi C KSV--202192
38/200 Combi D KSV--203004
38/200 Combi W KSV--208845
50/200 Combi C KSV--202193
50/200 Combi D KSV--203005
Sensors
The Simrad PI54 catch monitoring system can operate with six
sensors simultanously. Several sensor types are available.
Sensor Order number
PI Bottom Contact sensor PI3--207642
PI Catch sensor PI3--207641
PI Depth sensor, 300 m PI3--207637
PI Depth sensor, 600 m PI3--207638
PI Depth sensor, 1000 m PI3--207639
PI Height sensor PI3--280002
PI Spread sensor PI3--206869