Instruction manual

Charging and maintenance
4 When the charger is connected to the sensor, check the
charger lamps.
• After a few seconds, the lamp on the charger will change
from yellow to orange/red. This means that fast charging
is in progress.
• When t he battery in the sensor has reached 90% capacity
the lamp will change from orange/red to green with
short yellow flashes. This means that top charging is in
progress.
• When the battery is fully charged, the lamp t urns green.
Trickle charging is now active. You can safely allow
trickle charging for long periods of time.
Indicators
The Simrad PI MaxiCharger is only equipped with a single
indicator lamp, this lamp will however change colour to show the
status of the c harging process.
• Yellow: The charger is connected to 230 Vac, it has not been
connected to the sensor, and it is ready for use.
• Orange/Red: The charger is connected to a sensor, and fast
charging is in progress.
• Green with short yellow flashes: Top charging is in progress.
• Green: Trickle charging is in progress.
316870/A 29