Specifications

Simrad PI32
38
857-164636 / Rev.A
Status display
The Status display shows sensor data, signal thresholds and
background noise levels providing an overview of present
hydro-acoustical conditions and the margin for reliable signal
detection. Other information displayed includes cable status,
program version, and echo sounder / position information.
Note that some of the information provided by the Status
display assumes that you have the relevant sensors connected to
and operational on your PI32 system.
The following information is provided by the Status display.
(A) Numeric display. In this example, the information from a
depth sensor is shown. The current depth is 47.9 meters.
(B) Numeric display. In this example, the information from a
bottom contact sensor is shown. The trawl has currently lifted
off the seabed.
(C) Numeric display. In this example, the information from a
catch sensor is shown. The sensor has not yet been triggered.
(D) Information lines 1 and 2: The top line provides the
following information:
• The status of the MP (MultiPath) filter
• The current software ver sion of the PI32.