Specifications

Simrad PI32
24
857-164636 / Rev.A
Pelagic trawl
When used for pelagic trawling the PI32 system must have one
or more of the following sensors attached to the net: Depth
sensor(s), Bottom Contact sensor, Temperature sensor, Rip
sensor and Catch sensor(s).
The system is designed to be used with up to three sensors. We
recommend that you use a Catch sensor, a Depth sensor behind
the headrope, and a Spread sensor. Sensor configuration can be
tailored to suite individual needs.
(A) = Depth sensor (headrope)
(B) = Depth sensor (footrope)
(C) = Bottom contact sensor
(D) = Rip sensor
(E) = Temperature sensor
(F) = (G) = Catch sensors
Using the r ecommended sensors, the PI32 system will provide
the following information:
• Optimal vessel speed with regard to net sink rate and school
location.
• When the codend is full.
• Bottom approximation to avoid net contact.
• Net opening (using two depth sensors) and damage
• Ambient water temperature at gear depth.