Specifications

Simrad PI32
22
857-164636 / Rev.A
Danish seine
When used for Danish seining the PI32 system needs up to three
of the following sensors attached to the net: Depth and Bottom
Contact.
The system is designed to be used with up to three sensors.
Optimally two Depth sensors (located at the top and bottom of
the net) and one Bottom Contact sensor are used. Sensor
configuration can be tailored to suite individual needs.
(A) = Bottom contact sensor
(B) = (C) = Depth sensors
Using the r ecommended sensors, the PI32 system will provide
the following information:
• When to start hauling
• Monitor net sinkage rate
• Bottom approximation without net contact
• Net opening (using two depth sensors)