Specifications

Simrad PI32
10
857-164636 / Rev.A
Defining initial presentation pages
Observe the following procedure to set up the four display pages
on the PI32. The presentations chosen ar e those commonly used,
but using the guidelines in this procedure you can change the
content of individual pages to suit your requirements.
Page 1: Echo sounder
1 Press the MENU button to bring up the main menu.
2 Press the Selector pad to move the cursor (inverse video)
to the ECHO choice on the main menu.
3 On the Echo menu, select Echo display.
4 Press the ENT button to enter the choice.
An echo sounder appears. If you already know the basic settings
of an echo sounder you can access the setup page by pressing
the ENT button one more time.
Page 2: Numeric display
1 Press the WIN button once to select the next display page.
2 Press the MENU button to bring up the main menu.
3 Press the Selector pad to move the cursor (inverse video)
to the Fishery choice on the main menu.
4 On the Fishery menu, select Numeric display.
5 Press the ENT button to enter the choice.
The numeric display appears. If you already know how to
perform the basic setup, you can access the setup page by
pressing the ENT button one more time.
Page 3: Graphic display
1 Press the WIN button once to select the next display page.
2 Press the MENU button to bring up the main menu.
3 Press the Selector pad to move the cursor (inverse video)
to the FISHERY choice on the main menu.
4 On the Fishery menu, select Graphic display.
5 Press the ENT button to enter the choice.
The graphic display appears with the sensor data shown on the
top and the echo sounder shown below. If you already know
how to set up the basic parameters you can access the setup page
by pressing the ENT button one more time.
Page 4: Navigation display
1 Press the WIN button once to select the next display page.