Specifications

PI Configurator
197
857-164636 / Rev.A
How to uploa d factory settings
Once the sensor is connected to the computer, and you have
established communication, you can use the PI Configurator
utility to upload the applicable sensor’s factory settings.
1 Click the Read Senor Data button.
- Observe that the current sensor conf iguration
parameters are displayed in the message field. The
information includes sensor type, channel number, and
the sensor’s software version.
2 Click the Factory default button to retrieve the default
parameters for the current sensor.
3 Press Configure sensor button to upload the parameters
to the sensor.
4 Press Terminate communication, and disconnect the
sensor.