Specifications

Simrad PI32

180

857-164636 / Rev.A

Speed setup

These settings are used to set up the PI32 parameters related to

speed.

To access the parameters, press the MENU button to access the

main menu. Then, select Speed alarm, units & language on

the Echo menu.

LOG speed sensor: The PI32 may be interfaced to an external

speed log. Use this parameter to enable or disable the input from

this device.

LOG speed calibration: If an external speed log is used, this

parameter allows you to match the output data from the speed

log with the PI32 input. Refer to the applicable speed log

documentation, and find the rated output in number of pulses

per nautical miles. Then, set this PI32 accordingly.

Speed alarm maximum: This parameter provides you with an

audible warning if the vessel’s speed exceeds a predefined speed

limit.

Speed alarm minimum: This parameter provides you with an

audible warning if the v essel’s speed is lower than a predefined

minumum.