Specifications

Simrad NX40/45 Installation and Operation Manual66
17-3 Key Features
Depending on the engine and display, below are some key
features that SmartCraft can perform when connected;
these include:
Data Displays
Engine performance and tank level displays.•
Troll Control
Automatically maintains a set engine idle Revs per •
minute (RPM) or idle boat speed.
Trim Indicator
Displays the trim angle when engine trim is •
adjusted.
Alarms
SmartCraft engine fault alarms•
Engine fault list of active SmartCraft engine fault •
alarms
Engine fault history; e.g. list past SmartCraft engine •
fault alarms.
Tank low-level alarms•
Setup data and calibrations
SmartCraft setup data, and•
SmartCraft calibrations, Tanks, Trim and steering •
angle.
17-3-1 Data displays
The engine displays for SmartCraft show the engine
performance and tank level display.
To display engine performance data:
From the DISPLAY menu, scroll down and select 1.
More… Press  or > to conrm.
From the 2. More… menu, scroll down and select
Gauges; press
 to conrm.
To display tank level displays:
From the DISPLAY menu, scroll down and select 1.
More…, press  or > to conrm.
From the 2. More… menu, scroll down and select
Tanks, press
 or > to conrm.
Notes:
The factory default has gauges appropriate to the •
type of engine, either petrol or diesel. Refer to the
Navico SmartCraft Gateway installation manual for
further information.