Specifications

Simrad NX40/45 Installation and Operation Manual106
20-9 Installation: SmartCraft
If the boat has one or two SmartCraft capable Mercury
petrol/gasoline engines, connect the unit to the
SmartCraft engines with an optional SmartCraft gateway.
The display unit can display engine data and trim and
can control troll speed.
Note:
Fit a single gateway for single engines and a dual •
gateway for dual engines.
SmartCraft engines have fuel ow sensors, therefore •
Simrad fuel sensors are not required as well.
If the fuel tank does not have SmartCraft level •
sensors, wire for auto power.
During setup enter the SmartCraft setup data. For
information on installing, setting up and using SmartCraft,
see the SmartCraft Gateways Installation and Operation
Manual.
SmartCraft Gateway
White
20-8 Installation: petrol sensors
Fit the optional petrol/gasoline fuel kit following the
instructions supplied with the kit.
Note:
SmartCraft engines have fuel ow sensors, therefore •
Simrad fuel sensors are not required as well.
For dual engines, t two kits.•
Wire the unit for auto power. •
During setup:
a) set the fuel data
Fuel sensor cable
White
CAUTION
!
!
CAUTION
DANGER
WARNING
When you connect any
NMEA 0183 GPS antennas
to the GPS Port, ensure
that you disable the
NMEA output option/
setting. To do so, select
setup>COMMS menu and
uncheck .