Installation guide

6 |
NSS | Addendum for RTM-2, RTM-2.5 and RTM-3
EN
StructureMap
The StructureMap™ feature overlays SideScan images from a StructureScan on the map. This
makes it easier to visualize the underwater environment in relation to your position, and aids
in interpreting SideScan images.
The example below shows a chart panel with Structure overlay, combined with a traditional
SideScan panel.
You move around in the chart as usual when you have a Structure overlay;
- zoom the chart and the scanned image by using the IN/OUT keys or the rotary knob
- move the chart to view scanned image by dragging your finger in the selected direction
Pressing the X key will remove the cursor from the panel, and the chart center will be
positioned at the vessel.
Activating Structure overlay
1. Turn on Structure overlay from the chart menu
- The chart menu will be increased to show Structure options
- Structure data will start to appear on the chart screen as soon as Structure overlay is
enabled
2. Select Structure source
- Live data is default
¼ Note: Structure overlay can also be activated by selecting a saved StructureMap file from the
Files dialog.